Rack Matrix Technology's Forum

English => Broachlink Noah series embedded motherboard => Topic started by: totoro on May 11, 2021, 08:18:55 pm

Title: Noah motherboard compatible and tested softwares
Post by: totoro on May 11, 2021, 08:18:55 pm

I often listen during call with customers "Is that software or OS X or Y is working on Noah series ?".

So, I decided to list below all tested software on the embedded motherboards Noah2 / Noah3 / Noah4 / Noah5 / Noah6. This list is non exhaustive and you can add your tested working software in this topic:

OS:

• Debian 8, 9, 10, 11, 12
• FreeBSD
• Windows 10 (with VGA connector on Noah2 or HDMI connector on Noah3, Noah4, Noah5 or micro HDMI on Noah6)
• Windows 11 on Noah5 / Noah6 with TPM option
• Haiku OS (https://www.haiku-os.org/) beta 2 and nigthly build. (on msata or SATA only. Haiku has currently no driver for the eMMC, but working in progress by Haiku guys) This OS is impressively fast on Noah series

Router:

• OPNsense
  
• pfsense
• openwrt (with msata or sata only. The eMMC is not detect because openwrt start in legacy mode)

Aggregator

• OpenMPTCProuter

IPBX:

• WAZO
• VitalPBX
• 3CX

Hypervisor:

• Proxmox
• Hyperv core 2019 (in VGA/HDMI mode only for installation. Only on msata or SATA because eMMC is not detected by windows on Bay Trail)

Specialized OS:

• FreeNAS